Bộ chuyển đổi RS-232 sang RS-485 UT 204

Còn hàng

Liên hệ

 Bộ chuyển đổi RS-232 sang RS-485 UT 204 Mã: UT-204 Giá: Liên Hệ Hãng sản xuất: UTEK   Feature In order to carry through remote digital communication between computers with various standard series interfaces converter facilities or intelligent instruments, it needs inter exchange of standard series interface converter of compatible RS-232C and RS-485 standard is able to convert mono-end RS-232 signal to balance difference RS-485 signal and extend the communication distance to 1.2km. No external power but adopts a particular RS-232 charge pump to drive the system, and gains electricity without initializing the RS-232 series interface. An internal zero delay auto transceiver and particular I/O circuit automatically control the data stream direction instead of an handshake signal (for example RTS, DTR etc).There by in guarantees the function under RS-485 without changing the program compiled under RS-232 half-duplex mode and assures the adaptation to current operation software and interface hardware. The transmission rate of 300-115.2kbps. Is capable of applying between host computers, host computer and is extensions or external equipment and forms point-to-point or point-to-multipoint remote and multi-communication network, It implements multi-machine response communication and commonly used in systems of industrial automation control all-one-card. Door safe, car parking, ATM, bus charge, eatery sell out, staff attendance management, and toll highway etc.  Specification 1.  Interface feature: RS-232C,RS-485 standard interface compatible with EIA,TIA  2.  Electric interface: RS-232 end DB9 hole connector, RS-485 end  3.  DB9 needle connector, with connection pole  4.  Working mode: asynchronic half-duplex difference transmission  5.  Transmission media: twisted -pair or STP  6.  Transmission rate: 300-115.2KBPS  7.  External discharge dimension: 63mm x 33mm x 17mm  8.  Working circumstance : - 25⁰C to 70⁰C, relative humidity 5% to 95%  9.  Transmission distance: 1,200m (RS-485 end) 5m (RS-232 end)  10.  Protection grade: 600W surge protection each line RS-485 interfaces. Công ty Viễn Thông Tuấn Linh Số 15 Hoàng Đạo Thành, Kim Giang, Thanh Xuân, Hà Nội Số điện thoại: 0916955988 - 04.2242.5522 Facebook:https://www.facebook.com/ctytuanlinh Email: tuanlinhpc44@gmail.com  

 Bộ chuyển đổi RS-232 sang RS-485 UT 204

Mã: UT-204

Giá: Liên Hệ

Hãng sản xuất: UTEK 

 Feature

In order to carry through remote digital communication between computers with various standard series interfaces converter facilities or intelligent instruments, it needs inter exchange of standard series interface converter of compatible RS-232C and RS-485 standard is able to convert mono-end RS-232 signal to balance difference RS-485 signal and extend the communication distance to 1.2km. No external power but adopts a particular RS-232 charge pump to drive the system, and gains electricity without initializing the RS-232 series interface. An internal zero delay auto transceiver and particular I/O circuit automatically control the data stream direction instead of an handshake signal (for example RTS, DTR etc).There by in guarantees the function under RS-485 without changing the program compiled under RS-232 half-duplex mode and assures the adaptation to current operation software and interface hardware. The transmission rate of 300-115.2kbps. Is capable of applying between host computers, host computer and is extensions or external equipment and forms point-to-point or point-to-multipoint remote and multi-communication network, It implements multi-machine response communication and commonly used in systems of industrial automation control all-one-card. Door safe, car parking, ATM, bus charge, eatery sell out, staff attendance management, and toll highway etc.

 Specification

1.  Interface feature: RS-232C,RS-485 standard interface compatible with EIA,TIA 

2.  Electric interface: RS-232 end DB9 hole connector, RS-485 end 

3.  DB9 needle connector, with connection pole 

4.  Working mode: asynchronic half-duplex difference transmission 

5.  Transmission media: twisted -pair or STP 

6.  Transmission rate: 300-115.2KBPS 

7.  External discharge dimension: 63mm x 33mm x 17mm 

8.  Working circumstance : - 25⁰C to 70⁰C, relative humidity 5% to 95% 

9.  Transmission distance: 1,200m (RS-485 end) 5m (RS-232 end) 

10.  Protection grade: 600W surge protection each line RS-485 interfaces.

Công ty Viễn Thông Tuấn Linh
Số 15 Hoàng Đạo Thành, Kim Giang, Thanh Xuân, Hà Nội

Số điện thoại: 0916955988 - 04.2242.5522
Facebook:https://www.facebook.com/ctytuanlinh
Email: tuanlinhpc44@gmail.com

 
Facebook Tuấn Linh Telecom Zalo Tuấn Linh Telecom Messenger Tuấn Linh Telecom 0904990022